🚚 Free Worldwide Shipping on All Orders!Shop Now

Joint IT - Paving Grout - Various Colours 20kg tubs

The Joint-It Paving Jointing Compound 20kg is an easy-to-use solution for filling joints between paving slabs, including natural stone and Indian sandstone. Supplied in a large 20kg tub, it’s ideal for smaller paving projects, repairs, or touch-ups.

Designed for quick application, this compound simply brushes into joints and sets to create a durable, weed-resistant finish, helping maintain a clean and professional look.

We supply across Bradford, Bingley and surrounding areas.

Specification

Feature	Specification
Equipment Needed	All you need is a hard and soft brush, water, and a bucket of our mortar mix.
Key Features	Ready to Use Formulation Easy Application Suitable for Porcelain Long lasting Non-staining Weed, Power-washer & Frost Resistant Apply in wet or dry weather Larger 20KG buckets – Better value Water-Permeable Available in 4 colours – Neutral, Grey, Black and Dark Grey Eco-Friendly
Joint-It Pro Tips	Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. Joints must be a minimum of 3mm wide and 25mm deep to ensure the product is secure. We strongly recommend Limestone and Honed Black Granite are pre-sealed prior to application of Joint-It Simple. While this product is low maintenance, all patios require some level of maintenance annually, particularly in shaded areas or after the winter. A quick application of Joint-It So Clean keeps your patio looking new and refreshed. More information on installation, safety data and maintenance can be found here: https://jointit.com/products/joint-it-simple/
Storage	Other paving jointing compounds are sold in 12KG buckets at the same price. . If you have any product leftover after use, just put it back in the bucket and cover with clean water. It will last for 12 weeks. We do offer a smaller 12kg Tub
Simple to Use	Follow our easy, 4 step application to save your valuable time without compromising quality. Our natural sands harden on contact with air, so simply wet the area, brush in the product, and leave it to do the rest. Suitable for use by professional contractors and homeowners.
Application Instructions	1. Soak with Water You must soak your finished paving with water before you open your bucket of Joint-It Simple. Keep the paving soaked with water while you work. Do not allow the paving to dry as you work with the product. Keep re-wetting the paving as you work 2. Open Joint-It Simple The product is vacuum packed tightly inside the bag. Open the bag and tip the product out onto your wet paving. 3. Applying Joint-It Simple Use a hard bristle brush to work the product into the joints. You must soak your paving with water before you start to sweep Joint-It Simple into the joints. Keep the paving soaked with water while you work. Do not allow the paving to dry as you work. Keep re-wetting the paving as you work with the product. 4. Soak Again When all of the joints are full of product, and the paving looks like this, then soak the paving again with water. Allow the paving and product to dry. Depending on weather conditions, this will take between 15 and 45 minutes approximately. 5. Sweep in Joint-It Simple Using a soft bristle brush, sweep over the paved area and top up joints with product until all of the joints are completely full. Sweep up and remove any excess product.

Our wide range of complimentary products for your projects

Our store in Bingley sells a large range of garden timbers for decking, sheds, gates and fence projects. There is a wide range of fixings, fastenings hand tools and wood protection products.

Product Information

Shipping & Returns

Joint IT - Paving Grout - Various Colours 20kg tubs

Name: Joint IT - Paving Grout - Various Colours 20kg tubs
Brand: Bingley Fencing and Timber
SKU: joint-it-bradford
Availability: InStock

Designed for quick application, this compound simply brushes into joints and sets to create a durable, weed-resistant finish, helping maintain a clean and professional look.

We supply across Bradford, Bingley and surrounding areas.

Specification

Feature	Specification
Equipment Needed	All you need is a hard and soft brush, water, and a bucket of our mortar mix.
Key Features	Ready to Use Formulation Easy Application Suitable for Porcelain Long lasting Non-staining Weed, Power-washer & Frost Resistant Apply in wet or dry weather Larger 20KG buckets – Better value Water-Permeable Available in 4 colours – Neutral, Grey, Black and Dark Grey Eco-Friendly
Joint-It Pro Tips	Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. Joints must be a minimum of 3mm wide and 25mm deep to ensure the product is secure. We strongly recommend Limestone and Honed Black Granite are pre-sealed prior to application of Joint-It Simple. While this product is low maintenance, all patios require some level of maintenance annually, particularly in shaded areas or after the winter. A quick application of Joint-It So Clean keeps your patio looking new and refreshed. More information on installation, safety data and maintenance can be found here: https://jointit.com/products/joint-it-simple/
Storage	Other paving jointing compounds are sold in 12KG buckets at the same price. . If you have any product leftover after use, just put it back in the bucket and cover with clean water. It will last for 12 weeks. We do offer a smaller 12kg Tub
Simple to Use	Follow our easy, 4 step application to save your valuable time without compromising quality. Our natural sands harden on contact with air, so simply wet the area, brush in the product, and leave it to do the rest. Suitable for use by professional contractors and homeowners.
Application Instructions	1. Soak with Water You must soak your finished paving with water before you open your bucket of Joint-It Simple. Keep the paving soaked with water while you work. Do not allow the paving to dry as you work with the product. Keep re-wetting the paving as you work 2. Open Joint-It Simple The product is vacuum packed tightly inside the bag. Open the bag and tip the product out onto your wet paving. 3. Applying Joint-It Simple Use a hard bristle brush to work the product into the joints. You must soak your paving with water before you start to sweep Joint-It Simple into the joints. Keep the paving soaked with water while you work. Do not allow the paving to dry as you work. Keep re-wetting the paving as you work with the product. 4. Soak Again When all of the joints are full of product, and the paving looks like this, then soak the paving again with water. Allow the paving and product to dry. Depending on weather conditions, this will take between 15 and 45 minutes approximately. 5. Sweep in Joint-It Simple Using a soft bristle brush, sweep over the paved area and top up joints with product until all of the joints are completely full. Sweep up and remove any excess product.

Our wide range of complimentary products for your projects

Our store in Bingley sells a large range of garden timbers for decking, sheds, gates and fence projects. There is a wide range of fixings, fastenings hand tools and wood protection products.

Select Color

From $67.42

Joint IT - Paving Grout - Various Colours 20kg tubs—

$67.42

Select Color

From $67.42

Joint IT - Paving Grout - Various Colours 20kg tubs—

$67.42

Product Information

Shipping & Returns

Description

Designed for quick application, this compound simply brushes into joints and sets to create a durable, weed-resistant finish, helping maintain a clean and professional look.

We supply across Bradford, Bingley and surrounding areas.

Specification

Feature	Specification
Equipment Needed	All you need is a hard and soft brush, water, and a bucket of our mortar mix.
Key Features	Ready to Use Formulation Easy Application Suitable for Porcelain Long lasting Non-staining Weed, Power-washer & Frost Resistant Apply in wet or dry weather Larger 20KG buckets – Better value Water-Permeable Available in 4 colours – Neutral, Grey, Black and Dark Grey Eco-Friendly
Joint-It Pro Tips	Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. Joints must be a minimum of 3mm wide and 25mm deep to ensure the product is secure. We strongly recommend Limestone and Honed Black Granite are pre-sealed prior to application of Joint-It Simple. While this product is low maintenance, all patios require some level of maintenance annually, particularly in shaded areas or after the winter. A quick application of Joint-It So Clean keeps your patio looking new and refreshed. More information on installation, safety data and maintenance can be found here: https://jointit.com/products/joint-it-simple/
Storage	Other paving jointing compounds are sold in 12KG buckets at the same price. . If you have any product leftover after use, just put it back in the bucket and cover with clean water. It will last for 12 weeks. We do offer a smaller 12kg Tub
Simple to Use	Follow our easy, 4 step application to save your valuable time without compromising quality. Our natural sands harden on contact with air, so simply wet the area, brush in the product, and leave it to do the rest. Suitable for use by professional contractors and homeowners.
Application Instructions	1. Soak with Water You must soak your finished paving with water before you open your bucket of Joint-It Simple. Keep the paving soaked with water while you work. Do not allow the paving to dry as you work with the product. Keep re-wetting the paving as you work 2. Open Joint-It Simple The product is vacuum packed tightly inside the bag. Open the bag and tip the product out onto your wet paving. 3. Applying Joint-It Simple Use a hard bristle brush to work the product into the joints. You must soak your paving with water before you start to sweep Joint-It Simple into the joints. Keep the paving soaked with water while you work. Do not allow the paving to dry as you work. Keep re-wetting the paving as you work with the product. 4. Soak Again When all of the joints are full of product, and the paving looks like this, then soak the paving again with water. Allow the paving and product to dry. Depending on weather conditions, this will take between 15 and 45 minutes approximately. 5. Sweep in Joint-It Simple Using a soft bristle brush, sweep over the paved area and top up joints with product until all of the joints are completely full. Sweep up and remove any excess product.

Our wide range of complimentary products for your projects

Our store in Bingley sells a large range of garden timbers for decking, sheds, gates and fence projects. There is a wide range of fixings, fastenings hand tools and wood protection products.